Y TYPE STRAINER CAST IRON GG25 PN 16 FLANGED WITH EMPTYING SCREW

ART. 500

Y TYPE STRAINER CAST IRON GG25 PN 16 FLANGED WITH EMPTYING SCREW 500

APPLICAZIONE:
The strainer could be installed in in hot (max 120°C) and cold water pipe lines and other non-aggressive fluids. The strainer could be installed horizontally with the cap to the ground, but it has to be according with the flow direction marked by an arrow on the body. A vertical installation is only possible when the flow goes from up to down. The maximum working pressure amount to 16 bar.

EXECUTIVE CHARACTERISTICS:
The overall occupancy area is compliant with EN 558-1. The flanges are drilled according to EN 1092-2. The filter has drills 1mm diameter up to DN 125 and 1,5 mm starting from DN 150. The strainer has an emptying screw.

Average gauge of the poly-vinyl painting: 250 µ.

DN COD
15 2815
20 2816
25 2817
32 2818
40 2019
50 2820
65 2821
80 2822
100 2823
125 2824
150 2825
200 2826
250 2827
300 2828
Body, Cap Grey cast-iron EN-GJS-250
Screw Zinc-coated Steel
Filter Stainless steel 13% Cr
Seal between Body and Cap Graphite
EMPTYING SCREW Brass

STANDARD: UNI EN 1074-5

Y TYPE STRAINER CAST IRON GG25 PN 16 FLANGED WITH EMPTYING SCREW 500 tech

NB. Dimensions in mm and weight in Kg

Dn L H Kv (m³/h) Weight
15 130 76 5,7 2
20 150 83 10,4 3
25 160 91 16,4 4
32 180 110 27,3 6
40 200 118 46,8 7
50 230 178 64,7 10
65 290 187 86,9 14
80 310 200 107,9 20
100 350 226 217,0 27
125 400 264 307,8 40
150 480 309 436,7 57
200 600 410 789,2 97
250 730 444 1061,0 175
300 850 486 1250,0 225