Water Line Archivi

Archive for Water Line

RUBBER EXPANSION JOINT IN EPDM THREADED F/F PN16

ART. 200

APPLICATION:
The anti-vibrant joint is suitable for the installation on hydraulic system, conditioning system, heating system, it fit for the absorption of swingings, tensions, inclinations and vibrations close to pumps or other equipments that could transmit movement. It is also suitable for usage with fresh water, sea water, hot water, compressed air, oils and acidics.

Category: Antivibrating Rubber Joints, Water Line /

RUBBER EXPANSION JOINT IN EPDM FLANGED PN 16

ART. 200

Category: Antivibrating Rubber Joints, Water Line /

AIR RELEASE VALVE GGG 50 PN 16 – DOUBLE FLOAT

ART. 117

APPLICATION:
The rubber wedge gate valve is designed to be mounted in hot (max 70°C) and cold water pipe lines and other non-aggressive fluids. The maximum working pressure amount to 16 bar.
The air release valve double float can be installed in water lines in order to let the air exit from the line when loading water, back-to-front let the air flow in the line when emptying the line. Furthermore, when the line works in pressure let the air mixed with the water exit the pipes.

Category: Water Line, Industrial Valves Water Line /

BALL CHECK VALVE CAST IRON GG25 PN 16

ART. 106P

APPLICATION:
The ball check valve prevent the viscouses, thicks and with metals in suspension fluids back-flowing. Could be installed in vertical or in horizontal position, but the fluid flow has to be the one described by the arrow on the valve body.It can be installed either horizontally or vertically, as long as the fluid direction with the valve open is in the direction indicated by the arrow. The top temperature for the fluids has to be 70°C and the max allowed pressure is 16 bar, exception for DN 250 and DN 300 that is 10 bar. The seal is granted by a rubber ball. This valve has to avoid aggressive fluids.

Category: Water Line, Industrial Valves Water Line /

Y TYPE STRAINER CAST IRON GG25 PN 16 FLANGED WITH EMPTYING SCREW

ART. 500

APPLICAZIONE:
The strainer could be installed in in hot (max 120°C) and cold water pipe lines and other non-aggressive fluids. The strainer could be installed horizontally with the cap to the ground, but it has to be according with the flow direction marked by an arrow on the body. A vertical installation is only possible when the flow goes from up to down. The maximum working pressure amount to 16 bar.

Category: Water Line, Industrial Valves Water Line /

CHECK VALVE CAST IRON GG25 PN 16 FLANGED

ART. 106

APPLICATION:
The check valves are designed to be mounted in hot (max 70°C) and cold water pipe lines and other non-aggressive fluids. The maximum working pressure amount to 16 bar.

This kind of valve prevent the reflow of the fluids through the line and it has to be mounted keeping the wedge axis of rotation horizontal.

Category: Water Line, Industrial Valves Water Line /

GATE VALVE IN NODULAR CAST IRON GG 25 PN 10/16 – METAL WEDGE – OVAL BODY

ART. 107

APPLICATION:
The metal wedge gate valve could be installed in in hot (max 120°C) and cold water pipe lines and other non-aggressive fluids. The maximum working pressure amount to 16 bar.

Category: Water Line, Industrial Valves Water Line /

GATE VALVE IN NODULAR CAST IRON GG 25 PN 10 – METAL WEDGE – FLAT BODY

ART. 107

APPLICATION:
The metal wedge gate valve could be installed in in hot (max 120°C) and cold water pipe lines and other non-aggressive fluids. The maximum working pressure amount to 10 bar.

Category: Water Line, Industrial Valves Water Line /

HANDWHEEL GATE VALVES 405-406

ART. 407

Category: Water Plants Accessories, Water Line /

WRENCH JOINT

ART.497

The wrench joint is made in cast iron and thanks to a synthetic painting is resistant to decay. It is the same as the last part of the extension operating device Art. 498. It’s a good alternative to the extension when the gate valve is near the ground, so the wedge is easily reachable by the operator with the wrench. The wrench joint fits to the stem by pressure. Using it the gate valve stem could be manipulated with any universal wrench.

Category: Water Plants Accessories, Water Line /

WRENCH FOR GATE VALVE OPERATING DEVICE

ART. 63

The wrench for gate valve operating device is in steel painted in a black synthetic paint that prevents decay.
The wrench is suited to open and close the gate valve.
It transfer the rotative movement to the wedge of the gate valve.

Category: Water Plants Accessories, Water Line /

EXTENSION OPERATING DEVICE FOR GATE VALVE – PROTECTIVE COVER FOR EXTENSION DEVICE

ART. 498 – 499

ART. 498 EXTENSION OPERATING DEVICE FOR GATE VALVE: The extension is in steel painted with synthetic black paint that prevents from decay. The far end of the wrench is in cast iron, also painted with the same synthetic paint.
The extension – sold together with the protective cover – applies when a gate valve is below the ground and the operator can’t operate directly to the stem.
The fare end is square and its dimensions belong to the stem of the gate valve. Total weight art. 498+499 Kg. 3,5

THE EXTENSION ART. 498 HAS TO BE SOLD WITH THE PROTECTIVE COVER ART. 499

Category: Water Plants Accessories, Water Line /

T.A.I

Archive for Water Line

RUBBER EXPANSION JOINT IN EPDM THREADED F/F PN16

ART. 200

RUBBER EXPANSION JOINT IN EPDM FLANGED PN 16

ART. 200

AIR RELEASE VALVE GGG 50 PN 16 – DOUBLE FLOAT

ART. 117

BALL CHECK VALVE CAST IRON GG25 PN 16

ART. 106P

Y TYPE STRAINER CAST IRON GG25 PN 16 FLANGED WITH EMPTYING SCREW

ART. 500

CHECK VALVE CAST IRON GG25 PN 16 FLANGED

ART. 106

GATE VALVE IN NODULAR CAST IRON GG 25 PN 10/16 – METAL WEDGE – OVAL BODY

ART. 107

GATE VALVE IN NODULAR CAST IRON GG 25 PN 10 – METAL WEDGE – FLAT BODY

ART. 107

HANDWHEEL GATE VALVES 405-406

ART. 407

WRENCH JOINT

ART.497

WRENCH FOR GATE VALVE OPERATING DEVICE

ART. 63

EXTENSION OPERATING DEVICE FOR GATE VALVE – PROTECTIVE COVER FOR EXTENSION DEVICE

ART. 498 – 499

Language

Categories