ART. 107
APPLICATION:
The metal wedge gate valve could be installed in in hot (max 120°C) and cold water pipe lines and other non-aggressive fluids. The maximum working pressure amount to 10 bar.
EXECUTIVE CHARACTERISTICS:
The gate valve is designed to grant a total flow, minimal losses in loads, keep the compression of the rubber that upholsts the wedge, right-handed closing, could be installed in any position. The fastener is internal and doesn’t need servicing. The handwheel is included.
The overall occupancy area is compliant with EN 558-1. The flanges are drilled according to EN 1092-2.
Average gauge of the poly-vinyl painting: 100 µ.
| DN | COD |
| 40 | 2175E |
| 50 | 2176E |
| 65 | 2177E |
| 80 | 2174E |
| 100 | 2179E |
| 125 | 2180E |
| 150 | 2181E |
| 200 | 2173E |
| 250 | 2185E |
| 300 | 2186E |
| Body, Cup, Wedge | Grey cast-iron EN-GJS-250 |
| Handwheel | Grey cast-iron EN-GJL-250 |
| Stem | Stainless steel 13% Cr |
| Cap gasket | Graphite |
| Fastener | Brass |
| Seals | Brass |
| O-Ring | NBR |
STANDARD: UNI EN 1074-2
NB. Dimensions in mm and weight in Kg
| Dn | L | H | N | Weight |
| 40 | 140 | 180 | 13 | 10 |
| 50 | 150 | 205 | 13 | 11 |
| 65 | 170 | 220 | 13 | 13 |
| 80 | 180 | 245 | 13 | 17 |
| 100 | 190 | 293 | 15 | 23 |
| 125 | 200 | 352 | 15 | 32 |
| 150 | 210 | 398 | 18 | 43 |
| 200 | 230 | 477 | 18 | 71 |
| 250 | 250 | 570 | 18 | 98 |
| 300 | 270 | 650 | 19 | 145 |
