ART. 107
APPLICATION:
The metal wedge gate valve could be installed in in hot (max 120°C) and cold water pipe lines and other non-aggressive fluids. The maximum working pressure amount to 16 bar.
EXECUTIVE CHARACTERISTICS:
The gate valve is designed to grant a total flow, minimal losses in loads, keep the compression of the rubber that upholsts the wedge, right-handed closing, could be installed in any position. The fastener is internal and doesn’t need servicing. The handwheel is included.
The overall occupancy area is compliant with EN 558-1. The flanges are drilled according to EN 1092-2.
Average gauge of the poly-vinyl painting: 150 µ.
| DN | COD |
| 40 | 2190 |
| 50 | 2191 |
| 65 | 2192 |
| 80 | 2193 |
| 80 | 2193PN10 |
| 100 | 2194 |
| 125 | 2195 |
| 150 | 2196 |
| 200 | 2187 |
| 200 | 2187PN10 |
| 250 | 2188 |
| 250 | 2188PN10 |
| 300 | 2189 |
| 300 | 2189PN10 |
| Body, Cap, Wedge | Grey cast-iron EN-GJS-250 |
| Handwheel | Grey cast-iron EN-GJL-250 |
| Stem | Stainless steel 13% Cr |
| Gasket | EPDM |
| Fastener | Brass |
| Seals | Brass |
STANDARD: UNI EN 1074-2
NB. Dimensions in mm and weight in Kg
| Dn | L | H | N | Weight |
| 40 | 240 | 230 | 14 | 12 |
| 50 | 250 | 250 | 14 | 13 |
| 65 | 270 | 285 | 17 | 17 |
| 80 | 280 | 330 | 17 | 24 |
| 100 | 300 | 360 | 19 | 31 |
| 125 | 325 | 400 | 19 | 43 |
| 150 | 350 | 455 | 19 | 58 |
| 200 | 400 | 520 | 24 | 90 |
| 250 | 450 | 635 | 27 | 131 |
| 300 | 500 | 715 | 27 | 166 |
